Samsung HT-BD2T-XAA - Manual (Page 41)

0
system setup
Movie Frame (24 Fs)
Movies are usually fi lmed at 24 frames per second.
Some Blu-ray Discs have the capability of playing back at this
frame rate. Setting the Movie Frame (24Fs) feature to ON
allows you to adjust the Blu-ray player's HDMI output to 24
frames per second for improved picture quality.
You can enjoy the Movie Fame (24Fs) feature solely on a TV
supporting this frame rate.
This menu can only be selected in 1080i or 1080p HDMI
output resolution modes.
Depending on the disc, two types of source may be included: Movie material (24 frame) and Video
material (30 frame). When switching the source between Movie and Video, the screen may blink for a
few seconds.
Resolution
Sets the output resolution of the Component and HDMI video signal.
The number in 480i, 480p, 720p, 1080p and 1080i indicates
the number of lines of video. The i and p indicate interlace
and progressive scan, respectively.
- 1080p : Outputs 1080 lines of progressive video.
- 1080i : Outputs 1080 lines of interlaced video.
- 720p : Outputs 720 lines of progressive video.
- 480p : Outputs 480 lines progressive video.
- 480i : Outputs 480 lines of interlaced video.
Component does not output 1080p.
If the connected TV does not support the movie frame
or the selected resolution, you will see the following message:
If you select Yes and the resolution is not supported,
the TV's screen will be blank.
If the screen is blank, press and hold the STOP ( ) button on the front of the player for
more than 5 seconds (no disc inserted). All settings are restored to the factory default.
Follow the steps on the previous page to access each mode and select the Display Setup
that your TV will support.
•
M

M

No Disc
Photo
Setup
HDMI Setup
Parental Setup
System Upgrade
Display Setup
Screen Message : On
Resolution : 0p
Language Setup
Audio Setup TV Aspect : 16:9 Wide
Movie Frame (24 Fs) : Off
1080p
100i
720p
480p
480i
No Disc
Photo
Setup
HDMI Setup
Parental Setup
System Upgrade
Display Setup
Resolution : 480p
Screen Message : On
movie frame ( fs) : Off
Language Setup
Audio Setup
TV Aspect : 16:9 Wide
On
Off
No Disc
Photo
Setup
HDMI Setup
Parental Setup
System Upgrade
Display Setup
Screen Message : On
Front Display : Automatic
Resolution : 480p
Language Setup
Audio Setup TV Aspect : 16:9 Wide
Movie Frame (24 Fs) : Off
1080p
100i
720p
480p
480i
!
If no pictures are shown after the selection,
please wait for 15 seconds. And then,
the resolution will be reverted
to the previous value automatically.
Would you like to make a selection?
Yes No
HT-BD2_XAA_1026.indd 40 2007-11-05 �� 3:11:32