Connecting to a tv and external devices, Connecting to a network router, Connecting to a tv – Samsung HT-F6500W-ZA User Manual

Page 17: Connecting to external devices

Advertising
background image

English

17

|

03

Connections

Connecting to a TV and External Devices

HDMI OUT

HDMI IN

1

2

LAN

AUX IN

FM ANT

OPTICAL

DIGITAL

AUDIO IN

L

R

OPTICAL OUT

AUDIO OUT

HDMI OUT

HDMI IN

1

2

LAN

POWER

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT L

FRONT R

IMPEDANCE : 3

Ÿ

AUX IN

FM ANT

OPTICAL

DIGITAL

AUDIO IN

L

R

HDMI OUT

HDMI IN

Method 1

Method 2

Method 3

R

Red

W

White

External Devices

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your
TV. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control
and select HDMI as the external source of the TV.

Connecting to External Devices

To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the
mode changes in this order : BD/DVD D. IN AUX HDMI1 HDMI2 FM BT

Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable

Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your
digital device.

 Select the HDMI1 or HDMI2 mode.

Method 2 AUX IN : Connecting an External Analog Component

Using a RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the
external analog component.

 Select the AUX mode.

Be sure to match the colors on the cable plugs to the colors on the input and output jacks.

Method 3 OPTICAL : Connecting an External Digital Audio Component

Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-
Top-Boxes): Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device.
 Select the D. IN mode.

| NOTES |

\

To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.

\

This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.

\

This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported

HT-F6500W_ZA_0528.indd 17

HT-F6500W_ZA_0528.indd 17

2013-05-29 오후 5:49:40

2013-05-29 오후 5:49:40

Advertising