Samsung HT-F6500W-ZA - Manual (Page 46)

| 46
English
Network Services
Screen Mirroring
The Screen Mirroring function lets you view the screen
of your smart phone or smart device on the TV you have
connected to the home theater system.
1. With the Blu-ray's Home screen displayed, press
the BLUE (D) button on the remote. The Screen
Mirroring screen appears.
2. Launch AllShare Cast on your device.
3. On your device, find the name of the home theater
system in the list of available devices and then
select it.
4. The TV displays a connecting message (for
example, Connecting to Android_92gb...) and then
displays the connected message.
5. In a few moments, the screen of your device
appears on the TV screen.
| NOTES |
\ When you are using the Screen Mirroring function,
video stuttering or audio dropouts may occur,
depending on your environment.
\ The Home Theater can connect to devices that
support AllShare Cast. Note that all devices that have
AllShare Cast may not be fully supported, depending
on the manufacturer. For further information on mobile
connection support, refer to the manufacturer’s web
site.
\ Bluetooth transmissions can interfere with the Screen
Mirroring signal. Before using the Screen Mirroring
function, we strongly recommend that you turn off
the Bluetooth function on your smart phone or smart
device.
Using the Web Browser
You can access the Internet using the Web Browser
application.
Select Web Browser on the Home screen, and then
press the E button.
| NOTES |
\ When you run the Web Browser with the product
connected by HDMI to a BD Wise compatible TV -
and BD Wise is on - the browser is maximized to fill
the screen and the TV's resolution is set to the optimal
resolution automatically.
\ The Web Browser is not compatible with Java
applications.
\ If you attempt to download a file, and the file cannot
be saved, an error message will appear.
\ E-commerce (purchasing products online) is not
supported.
\ ActiveX is not supported.
\ Access may be blocked to some websites or to web
browsers operated by certain businesses.
Link Browsing and Pointer Browsing
The Web Browser provides two types of browsing,
Pointer Browsing and Link Browsing. When you launch
the browser for the first time, Pointer Browsing is active.
If you are using a mouse to navigate in the Web Browser,
we recommend leaving Pointer Browsing active. If you
are using your remote to navigate in the Web Browser,
we recommend that you replace Pointer Browsing with
Link Browsing. Link Browsing moves a highlight from one
link to the next in the Web Browser and is much faster
than Pointer Browsing if you are using your remote.
To activate Link Browsing, follow these steps:
1. Use the ▲▼◄► buttons on your remote to move
the pointer to the Link Browser icon on the top right
of the screen. The Link Browser icon is the third
icon from the right.
The pointer will be in the correct position if the icon
turns blue and the words “Link Browsing” appear
on the screen.
2. Press the E button. Link Browsing is activated
and will remain active whenever you bring up the
Web Browser.
HT-F6500W_ZA_0702.indd 46 HT-F6500W_ZA_0702.indd 46 2013-07-02 오후 3:47:25 2013-07-02 오후 3:47:25