Samsung HT-X200T-XAA - Manual (Page 23)

ENG
SETUP
45 44
Settings
(Con’t)
Please use the Registration code to register this player with the DivX (R) video on demand format.
To learn more, go to www.divx.com/vod.
DivX (R) registration
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
1 Press the EJECT button and then press the MENU button.
2 Press the Cursor button to move to <Setup> and then press the
ENTER button.
3 Press the Cursor button to move to <DVD TYPE> and then press the
ENTER button.
4 Press the Cursor , button to move to <DVD VIDEO> and then press the
ENTER button.
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
• DVD VIDEO : set to play the DVD video contents contained on a DVD audio disc.
• DVD AUDIO : set to play the default DVD audio.
DVD Playback Mode
• DVD Play mode is set to DVD Audio as factory default setting.
• Powering off the main unit will automatically switch to the DVD Audio mode.
MOVE ENTER EXIT RETURN
MOVE ENTER EXIT RETURN
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match
the video.
1 In Stop mode, press the MENU button.
2 Press the Cursor button to move to <Audio> and then press the ENTER button.
3 Press the Cursor button to move to <AV-SYNC> and then press the
ENTER button.
4 Press the Cursor , button to select the AV-SYNC Delay Time and then
press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
Setting the AV SYNC
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital
sound when watching movies at low volume at night.
1 In Stop mode, press the MENU button.
2 Press the Cursor button to move to <Audio> and then press the ENTER button.
3 Press the Cursor button to move to <DRC> and then press the ENTER button.
4 Press the Cursor , button to adjust the DRC.
When the Cursor button is pressed, the effect is greater, and when the Cursor button is
pressed, the effect is smaller.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
Setting the DRC (Dynamic Range Compression)
MOVE ENTER EXIT
CHANGE EXIT RETURN
RETURN
MOVE ENTER EXIT RETURN
MOVE SELECT EXIT RETURN