Samsung SL-C1810W-XAA - Manual (Page 101)

Understanding display messages
101 4. Troubleshooting
11
Misc. messages
Message Meaning Suggested solutions
Adjusting Color
Registration...
The machine is adjusting
the color registration. Wait a few minutes.
Calibrating
image density…
The machine is calibrating
the image density. Wait a few minutes.
Door Open
Close it
The cover is not securely
latched. Close the cover until it locks
into place.
Error [error
number]
Install [color]
toner
The indicated toner
cartridge is installed
improperly, or the
connector is polluted. Reinstall the Samsung-
genuine toner cartridge two
or three times to confirm it is
seated properly. If the
problem persists, please call
for service.
Error [error
number]
Turn off then on
The machine unit cannot
be controlled. Reboot the power and try the
printing job again. If the
problem persists, please call
for service.
Error [error
number]
Call for service
Install TR.
belt unit.
The transfer belt is not
installed. Install a Samsung-genuine
transfer belt.
Not compatible
transfer belt
The transfer belt of the
machine is not for your
machine. Install the a Samsung-
genuine part designed for
your machine.
Not installed
Waste tank
The is waste toner
container not installed. Install a Samsung-genuine
waste toner container.
Not proper room
temp. Move set
The machine is in a room
with improper room
temperature. Move the machine to a room
with proper room
temperature.
Output bin Full
Remove paper
The output tray is full. Remove papers from the
output tray, the machine
resumes printing. If the
problem persists, call for
service.
Prepare new
Transfer belt
The life of the transfer belt
will expired soon. Replace the transfer belt with
a new one. If the problem
persists, please call for
service.
Replace new
Transfer belt
The life of the transfer belt
has expired.
Message Meaning Suggested solutions