Samsung SL-C1810W-XAA - Manual (Page 37)

Media and tray
37 2. Menu Overview and Basic Setup
3 Squeeze the multi-purpose (or manual feeder) tray paper width guides
and adjust them to the width of the paper. Do not force them too much,
or the paper will bent resulting in a paper jam or skew.
• When printing the special media, you must follow the loading guideline
(See "Printing on special media" on page 37).
• When papers overlap when printing using multi-purpose tray, open tray
1 and remove overlapping papers then try printing again.
4 When you print a document, set the paper type and size for the multi-
purpose (or manual feeder) tray (see "Setting the paper size and type" on
page 42).
4
Printing on special media
The table below shows the special media usable in tray.
The paper setting in the machine and driver should match to print without a
paper mismatch error.
To change the paper setting set in the machine, from the Samsung Easy Printer
Manager
select
(Switch to advanced mode)
> Device Settings.
Or if your machine supports a display screen, you can set it using the (Menu)
button on the control panel.
Then, set the paper type from the Printing preferences window > Paper tab >
Paper Type (see "Opening printing preferences" on page 45).
For example, if you want to print on labels, select Labels for Paper Type.
• When using special media, we recommend you feed one sheet at a time
(see "Print media specifications" on page 106).
• Illustrations on this user’s guide may differ from your machine
depending on its options or models. Check your machine type (see
"Front view" on page 17).
To see for paper weights for each sheet, refer to "Print media specifications" on
page 106.
2
1
CLP-41x series
C181x series CLP-68x series