How to set the oven for self-cleaning, How to delay the start of self-cleaning, How to turn off the self-cleaning feature – Samsung NE595R1ABSR-AA User Manual

Page 55: After a self-cleaning cycle

Advertising
background image

Maintaining your appliance _54

MAINT

AINING Y

OUR APPLIANCE

How to set the oven for self-cleaning

1. Select the length of time for the self-cleaning operation, eg. 3

hours.

Press the SELF CLEAN pad once for a 3 hour clean time, twice

for a 4 hour clean time, or 3 times for a 2 hour clean time.

The default setting is 3 hours.

2. Start the self-cleaning cycle.

Press the START/SET pad. The motor-driven door lock will

engage automatically.

When the self-cleaning cycle is done, End will show in the display

and a beep will sound 6 times.

• You will not be able to start a self-cleaning cycle if the control lockout feature is activated

or if the oven’s temperature is too hot.

• The oven door locks automatically. The display will show the clean time remaining. You

cannot open the oven door until the temperature drops to a safe/cool temperature and

the door unlocks automatically.

• The self-cleaning feature will not operate when the warming center is on.
• The self-clean feature will not operate when the partition is in the oven.
• The self-clean feature will not operate when a surface cooktop element is on. if a surface

element gets turned on during a self-cleaning cycle, the cycle will turn off automatically.

How to delay the start of self-cleaning

1. Press the SELF CLEAN pad.

Select the desired self-clean time by pressing the SELF CLEAN pad.

2. Press the DELAY START pad.
3. Using the CLOCK and number pads, enter the time you want the clean cycle to start.
4. Press the START/SET pad.

The display will show Delay, Self clean, and the Lock icon. The motor-driven door lock will

engage automatically.

5. The Self-Cleaning cycle will turn on automatically at the set time.
6. When the self-cleaning cycle is done, End will show in the display and a beep will sound 6

times.

How to turn off the self-cleaning feature

You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven.

1. Press the CLEAR/OFF pad.
2. You will be able to open the oven door once the oven has cooled down for approximately 1

hour.

After a self-cleaning cycle

• You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with a

vinegar and water mixture.

• If the oven is not clean after one cycle, repeat the cycle.

• You cannot set the oven for cooking until the oven is cool enough for the door to unlock.

NE595R1ABSR_AA_DG68-00432A-04_EN.indd 54

02/01/2014 13:02:01

Advertising