Samsung HT-HM55-ZA - Manual (Page 19)

19
- English
Settings
Ğ Wireless - Automatic
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 18)
1. In the Network Settings screen, change
Network Type to Wireless. The product searches
for and then displays a list of the available
networks.
Network Settings
Select your network type.
Network Type Wireless
Wireless network
m Move " Select ' Return
You can connect your BD
Home Theater to the
internet. Please select which wireless
network to use.
WPS(PBC) Search
si-ap
MIC
KIMING_VTOWER
2. Select the desired network, and then press the
v button.
3. On the Security screen, enter your network's
security code or pass phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with ▲▼◀▶ buttons, and
then pressing v button.
4. When finished, select done, and then press the
v button. The product verifies the network
connection and then connects to the network.
✎ You should be able to find the security code or
pass phrase on one of the set up screens you
used to set up your router or modem.
Ğ Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 18)
1. In the Network Settings screen, change
Network Type to Wireless. The product searches
for and then displays a list of the available
networks.
2. Scroll through the list, select the desired
network or Add Network, and then press the
v button.
3. If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
4. Enter your wireless network or wireless router's
name.
● Enter numbers directly using the number
buttons on your remote control.
●
Enter letters by selecting a letter with the
▲▼◀▶ buttons, and then pressing the v
button.
●
To display capital letters (or redisplay lower
case letters if capital letters are displayed),
select
, and then press the v button.
● To display symbols and punctuation, select
123#&, and then press the v button. To
redisplay letters, select 123#&, and then
press the v button.
When finished, select done, and then press the
v button.
5. On the Security method screen that appears,
use the ▲▼ buttons to select the network's
Security method, and then press the v
button. On the next screen, enter your
network's security code or pass phrase.
●
Enter numbers directly using the number
buttons on your remote control.
●
Enter letters by selecting a letter with the
▲▼◀▶ buttons, and then pressing the v
button.
When finished, select done, and then press
the v button. The product searches for the
network.
6. The Network connection fail screen appears.
Use ◀▶ buttons to select Ip Settings, and then
press the v button.
7. Select the Ip Setting field, and then set it to
Enter manually.
8. Select a network parameter to enter (Ip
Address, for example), and then press v
button. Use the number keypad on your remote
control to enter the numbers for the parameter.
You can also enter numbers using the ▲▼
buttons. Use the ◀▶ buttons on the remote
control to move from entry field to entry field
within a parameter. When done with one value,
press the v button.
9. Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 8.
10. Repeat Steps 8 and 9 until you have filled in all
parameters.