Regulatory information, Important warning, Approvals and certifications – Samsung SCX-4729FW-XAA User Manual
Page 121: Declaration of conformity (european countries)
Regulatory information
121
5. Appendix
The 13 amp plug is the most widely used in the UK and should be suitable.
However, some buildings (mainly old ones) do not have normal 13 amp plug
sockets. You need to buy a suitable plug adaptor. Do not remove the moulded
plug.
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric shock if you
plug it into a socket.
Important warning:
If the wires in the mains lead do not match the colors marked in your plug, do
the following:
You must connect the green and yellow wire to the pin marked by the letter “E”
or by the safety ‘Earth symbol’ or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter “N” or
colored black.
You must connect the brown wire to the pin which is marked with the letter “L”
or colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
23
Declaration of conformity (European countries)
Approvals and Certifications
January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of
the member states related to low voltage equipment.
January 1, 1996: Council Directive 2004/108/EC, approximation of the laws of
the Member States related to electromagnetic compatibility.
You must earth this machine.
The wires in the mains lead have the following color code:
•
Green and Yellow: Earth
•
Blue: Neutral
•
Brown: Live
Hereby, Samsung Electronics, declares that this [SCX-470xND Series]
is incompliance with the essential requirements and other
relevantprovisions of Low Voltage Directive (2006/95/EC), EMC
Directive (2004/108/EC).
Hereby, Samsung Electronics, declares that this [SCX-472xFW Series,
SCX-472xHW Series, SCX-472xFD Series, SCX-472xHD Series, SCX-
472xHN Series, SCX-470xDN Series] is in compliance with the
essential requirements and other relevant provisions of R&TTE
Directive 1999/5/EC.
The declaration of conformity may be consulted at
to Support > Download center and enter
your printer (MFP) name to browse the EuDoC.