Samsung SCX-4729FW-XAA - Manual (Page 168)

Wireless network setup
168 2. Using a Network-Connected Machine
16 When the wireless network settings are completed, disconnect the USB
cable between the computer and machine.
17 Follow the instructions on the screen to complete the installation. After
the installation is finished, click Quit or Restart.
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad hoc wireless network by
following these simple directions.
Items to prepare
• Network-connected computer
• Software CD that provided with your machine
• The machine installed with a wireless network interface
• USB cable
Creating the ad hoc network in Macintosh
1 Check whether the USB cable is connected to the machine.
2 Turn on your computer and machine.
3 Insert the supplied software CD into your CD-ROM drive.
4 Double-click the CD-ROM icon that appears on your Macintosh desktop.
5 Double-click the MAC_Installer folder > Installer OS X icon.
6 Click Continue.
7 Read the license agreement and click Continue.
8 Click Agree to agree to the license agreement.
9 When the message that warns that all applications will close on your
computer appears, click Continue.
10 Click Wireless Network Setting and Installation.
11 The software searches the wireless network devices.
If the search has failed, check if the USB cable is connected between the
computer and machine properly, and follow the instructions in the window.