Samsung RT19FSSS User Manual

Page 15

Advertising
background image

24.

SIZE

25.

POSITION

26. MAGIC-CH

1. POWER

Use this button to turn the monitor on and off.

2. CHANNEL

Selects TV channels in the TV mode. You may use this button in PIP mode as well.

3. +100

Press to select channels over 100.
For example, to select channel 121, press "+100", then press "2" and "1".
-/-- (One/Two-Digit channel selection )
Use to select a channel numbered ten or over.
Press this button, and the "--" symbol is displayed.
Enter the two-digit channel number.

4. -

+

Adjusts the audio volume.

5. MUTE

Pauses (mutes) the audio output temporarily.
Displays on the lower left corner of the screen.
The audio resumes if Mute or -

+ is pressed in the Mute mode.

6. TTX/MIX

TV channels provide written information services via teletext.
For more information >

TTX / MIX

TTX / MIX is mainly used in Europe.

7. MENU

Use this button to open the on-screen menu and exit from the menu screen or close screen
adjustment menu.

8. ENTER

Activates a highlighted menu item.

9. FM RADIO

Turns on/off FM Radio.
In PC/DVI mode, sets only SOUND to FM Radio.
In areas where signal is weak, noise may occur while FM radio is broadcast.
In general VIDEO SOURCE mode, sets to FM RADIO, turning off the screen.

10. CH/P

In TV mode, selects TV channels.

11. SOURCE

Switches from PC mode to Video mode.
Changing the source is allowed only external devices that are connected to the monitor at
the time.

12. INFO

Current picture information displays on the upper left corner of the screen.

13. EXIT

Exits from the menu screen.

14. Up-Down Left-Right Buttons

Moves from one menu item to another horizontally, vertically or adjusts selected menu
values.

15. AUTO -( Available in PC/DVI Mode Only )

Adjusts the screen display automatically.

16. P.MODE, M/B (MagicBright™)

When you press this button, current mode is displayed on the lower center of the screen.

TV / AV / Ext. / S-Video /Component Mode : P.MODE( Picture Mode )
The Monitor has four automatic picture settings that are preset at the factory.
Then push button again to circle through available preconfigured modes.
( Dynamic

Standard

Movie

Custom )

PC / DVI Mode : M/B ( MagicBright™ )

Advertising