Samsung RT19FSSS - Manual (Page 36)

Available Mode : PC / DVI : TV : Ext. : AV : S-Video : Component
OSD Description Play
Area
Configuration When you turn the power on of the product for the first time since it released
from a factory, menu to select location will appear.
Choose the region and country where you use the monitor.
This is because broadcasting type varies according to region and country.
You can select broadcasting type in OSD menu as well by selecting MENU-
Setup-Area Configuration.
Note : This product can be used worldwide when area configuration is set up
regardless of broadcasting type.
Note : When country is not selected properly, the product may not locate
channels.
Language You can choose one of 2 language.
• English, БЯ±¹¾о
Note : The language chosen affects only the language of the OSD.
It has no effect on any software running on the computer.
Sleep Timer Use to set the Monitor to be turned off automatically the set in
certain minutes.
(Off, 30, 60, 90, 120, 150, 180)
Menu
Transparency Changes the opaqueness of the background of the OSD.
• High
• Medium
• Low
• Opaque
Blue Screen If no signal is being received or the signal is very weak, a
blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor picture,
you must set the "Blue screen" mode to "Off".
• On / Off
Reset Picture parameters are replaced with the factory default
values.
- Available in PC Mode Only
1) Image Reset
2) Colour Reset
1) Image Reset
2) Colour Reset