American Dynamics MegaPower CPU ADMPCPU - Manual (Page 20)

MEGAPOWER CPU 8200-0421-02, REV. E
OPERATOR’S GUIDE 18 of 21
Appendix D: Keyboard Commands for ADTTE
The table below explains control functions for cameras using the ADTTE Touch Tracker ® Matrix Keyboard. For
further information, refer to the ADTTE Touch Tracker Operator’s Manual, 8000-2675-02.
Figure 8. ADTTE Touch Tracker matrix keyboard layout
Operator Functions
Function Actions
System Log On -Enter User Code -press Ack -Enter System Passcode -press Ack
System Log Off -Press User
Keyboard Lock/Unlock -Enter keyboard password -press Lock (toggles on and off)
Select Monitor -Enter monitor # -press
Call Camera -Enter camera # -press
Lock Camera -Enter camera # -press 2 - press F1
Unlock Camera -Enter camera # -press 1 -press F1
Pan/tilt Camera -Move control stick left/right or forward/backward
Zoom Camera -Press Zoom buttons (left side of control stick) for Tele or Wide
Focus Camera -Press Focus buttons (right side of control stick) for Far or Near
Adjust Iris -Press Iris Open to brighten picture -press Iris Close to darken picture
Call Preset -Call camera -enter the Preset # (1-72) -press Shot
Run Pattern -Call camera -enter Pattern # -press Pattern -press Run
Run System Tour -Select monitor -enter Tour # -press Run -press Ack