Connecting to an audio system, 15 connecting to an audio system, Connecting to an hdmi – Samsung BD-ES6000-ZA User Manual
Page 15: Supported av receiver, Connecting to an av receiver, With dolby digital or dts decoder
03
Connections
Connecting to an Audio System
You can connect the Blu-ray player to an the audio system using the method illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HdMI supported AV receiver
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your receiver.
• Best quality (Recommended)
Method 2 Connecting to an AV receiver with dolby digital or dTS decoder
• Using a digital Optical cable (not supplied), connect the Optical Digital Audio Out jack on the product to
the Digital Optical In jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
Audio
Method 2
Audio
Method 1
English
15
|