Samsung BD-ES6000-ZA - Manual (Page 26)

Settings
1. Select Start in the Network Settings screen,
and then press the v button. The player
searches for and then displays a list of the
available networks.
2. Select the desired network, and then press
the v button.
3. Select Next, and then press the v button
again.
4. On the Security screen, enter your network's
Security Code or Pass Phrase. Enter
numbers directly using the number buttons
on your remote control. Enter letters by
selecting a letter with the ▲▼◄► buttons,
and then pressing the v button.
5. When done, select Next at the right of the
screen, and then press the v button.
6. The Network Status screen appears.
The player attempts to verify the network
connection and fails.
7. Select Ip Settings on the right of the screen,
and press the v button. The IP Settings
screen appears.
8. Select the Ip Mode field, and then set it to
Manual.
9. Use the number keypad on your remote to
enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.
|NOTE |
\
You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on page 25.
10. When done, highlight OK, and then press v
button. The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When it
is done, highlight OK, and then press v
button.
Ğ
WpS(pBC)
After followng Steps 1 to 3 in "Configuring Your
Network Connection" on page 24.
1. Select Start in the Network Settings screen,
and then press the v button.
The player searches for and then displays a
list of the available networks.
2. Press the WpS(pBC) button on your router
within two minutes. Your player automatically
acquires all the network settings values it
needs and connects to your network.
The Network Status screen appears. The
player connects to the network after the
network connection is verified.
Wi-Fi direct
The Wi-Fi Direct function allows you to connect
Wi-Fi Direct devices to the player and each other
using a peer-to-peer network, without a wireless
router.
|NOTE |
\ Some Wi-Fi Direct devices may not support the AllShare
function if connected via Wi-Fi Direct. If this is the case,
it is advisable to change the network connection method
between devices.
1. Turn on the Wi-Fi direct device and activate
its Wi-Fi Direct function.
2. In the Home screen, select Settings, and
then press the v button.
3. Select Network, and then press the v
button.
4. Select Wi-Fi direct, and then press the v
button.
The Wi-Fi Direct devices that you can
connect appear.
Display
Audio
Network
System
Support
Refresh
Close
Wi-Fi Direct
Device Name : [BD]ES6000
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX Disconnected
' Return
|
26
English