Options during a call – Samsung SM-C105AZWAATT User Manual
Page 63
Options During a Call
Your phone provides a number of control functions that you
can use during a call.
Adjusting the Call Volume
During a call, to adjust the volume, use the Volume keys on
the left side of the phone.
Ⅲ Press the Up volume key to increase the volume level
and press the Down volume key to decrease the
volume level.
– or –
Quickly add more volume to the incoming audio by
tapping the on-screen Extra volume button
.
From the Home screen, you can also adjust the ringer volume
using these same keys.
In-Call Options
During an active call there are several functions available by
tapping a corresponding on-screen button.
•
Hold: place the current active call on hold.
•
Add call: displays the dialer so you can call another person.
•
Keypad: displays the on-screen keypad, where you can
enter number using DTMF (Dual Tone Multi-Frequency).
•
End call: terminates the call.
•
Speaker: routes the phone’s audio through either the speaker or
through the earpiece.
–
Tap Speaker to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.) A green line
will appear under the Speaker button.
–
Tap Speaker again to use the phone’s earpiece (see “Using
the Speakerphone During an Active Call” on page 59). The
green line will disappear when Speaker is not activated.
•
Mute/Unmute turn the onboard microphone either on or off.
–
Tap Mute during a call to mute the microphone. A green line
will appear under the Mute button.
–
Tap Mute again to unmute the microphone. The green line will
disappear when Mute is not activated.
•
Headset connects to a Bluetooth headset.
–
Tap Headset during a call to activate a Bluetooth headset. A
green line will appear under the Headset button.
–
Tap Headset again to de-activate the Bluetooth headset. The
green line will disappear when the Headset is not activated.
•
Tap
for more options:
–
Contacts: allows you to go to your Contact list.
–
Memo: allows you to write a memo.
–
Message: allows you to write a message during a call.
Call Functions
56