Samsung SM-C105AZWAATT - Manual (Page 64)

1. While on a call, tap Hold Hold Hold . This action places
the current caller on hold.
2. You can later reactivate this call by tapping Unhold
Unhold Unhold .
To make a new call while you hav e a call in progress
1. Tap Hold Hold Hold .
2. Tap Add call to display the dialer.
3. Enter the new number and tap .
Once connected, the active call will appear in a large
box at the top of your screen and the call on hold will
appear in a smaller box in the middle of your screen.
Switching Between Calls
When you have an active call and a call on hold, you may
switch between the two calls, changing the one on hold to
active and placing the other on hold.
1. Tap Swap .
The current call (caller #2) is placed on hold and the
previous call on hold (caller #1) is then reactivated so
that you can continue conversing with that person. The
active call will appear in a green box.
Personalizing the Call Sound Setting
During a call it may be necessary to adjust the sound of the
incoming ca ll by selecting an audio equalizer setting for the
current call.
1. From the ca ll screen, tap .
2. Confirm the option is enabled .
3. Select a n available option. Choose from: Adapt Sound
left, Adapt Sound right, Soft sound, Clear sound, and
Off.
Activating N oise Reduction
During a call it may be necess ary to activate the noise
reduction fe ature. Activating this feature can improve the
quality of your c onversation by reducing ambient noise.
Noise reduct ion in on by default.
1. Tap to turn Noise reduction off.
2. Tap to turn Noise reduction on.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress if your network supports this service.
2. Tap to end the currently active call.
57