Samsung SCH-A670ZSMXAR - Manual (Page 102)

94
Digit Dial
Digit Dial lets you dial any valid seven-digit or ten-digit phone
number by speaking the number naturally, without pausing
between digits.
D
IGIT
D
IAL
T
IPS
•
Digit Dial works best in quieter environments.
• When pronouncing a number, speak at a normal speed,
saying each digit clearly. There is no need to pause
between digits.
• The phone recognizes the digits one, two, three, four,
five, six, seven, eight, nine, zero, and oh (zero). It doesn’t
recognize numbers such as “one eight hundred” for “1-
800.” Instead, say “one eight zero zero,” or “one eight oh
oh.”
•
The phone recognizes only valid seven or ten-digit North
American phone numbers, optionally preceded by the
digit “1.”
• If you are experiencing frequent problems getting Digit
Dial to recognize you, try adapting it to your voice, which
can greatly improve accuracy. See the following section
on Digit Dial Adaptation for more information.
U SE D IGIT D IAL
1. Press and hold .
“ Say a Command ” appears in the display and is
pronounced through the speaker.
2. Say “Digit Dial.” You’re prompted to say the number.
3. Pronounce the number naturally and clearly.
The phone may display one or more numbers on the
screen and prompt you for confirmation.
MetroA670.book Page 94 Friday, November 12, 2004 12:03 PM