Samsung SCH-A670ZSMXAR - Manual (Page 45)

Contacts 37
Add pauses
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering the numbers, you can store the numbers to Contacts
along with special characters called pauses.
•
P pause: Stops the calling sequence until the phone
receives further input.
• T pause: Stops the calling sequence for two seconds,
then sends the remaining digits.
You can enter multiple two-second pauses to extend the
length of a pause. For example, two consecutive two-second
pauses cause a total pause time of four seconds. Keep in
mind pauses count as digits towards the 32-digit maximum.
Store pauses in a Contacts entry
1. In standby mode, enter the number you want to store
(such as your bank’s teleservice number).
2. Press the left soft key ( ) Option . The following pause
menu options appear in the display.
P pause
T pause
P pause is a hard pause (awaits input from you).
T pause is a 2-second pause that resumes after 2 seconds.
3. Use the navigation key to highlight the pause option of
your choice
4. Press to enter the highlighted pause into the
number sequence.
MetroA670.book Page 37 Friday, November 12, 2004 12:03 PM