Samsung BD-C5900-XAA - Manual (Page 27)

English

04
Connections
Wireless Network
You can connect to network with a Wireless IP sharer. To connect to a wireless network, you need a
wireless AP/IP router and a Samsung wireless LAN adapter (WIS09ABGN).
Connect the wireless LAN adapter to the Wireless LAN Adapter jack on the rear panel of the player.
Set the network options. (See pages 37~41)
NOTE
Use only the Samsung wireless LAN adapter with this player. (Model name: WIS09ABGN).
Do not use LAN this adapter with any other third-party players.
Please contact your player’s retailer to purchase the wireless LAN adapter.
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. We recommend using IEEE 802.11n for stable
operation of the wireless network.
Wireless LAN, by its nature, may cause interference, depending on operating conditions. (AP performance, distance,
obstacles, interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
When you apply the security key for the AP (wireless IP sharer), the player only supports the following security protocols:
Authentication Mode : WEP, WPAPSK, WPA2PSK
Encryption Type : WEP, AES
To use the AllShare function, you must connect your PC to your network as shown in the figure.
The connection can be wired or wireless.
1.
2.
✎
▪
▪
▪
▪
▪
1)
2)
▪
Wireless IP sharer
Wireless LAN Adapter
(not included)
Networking with PC for
AllShare function
(See pages 60~61)
Broadband
service