Samsung BD-C5900-XAA - Manual (Page 32)


English
Setup
Resolution according to the output mode
Blu-ray Disc playback
Output
Setup
HDMI / connected HDMI / not connected
HDMI Mode Component/VIDEO Mode Component Mode VIDEO Mode
Auto Optimal Resolution 480i - -
1080p, Movie Frame(24Fs) off 1080p@60F 480i - -
1080p/1080i,
Movie Frame(24Fs) on
1080p@24F 480i - -
1080i, Movie Frame(24Fs) off 1080i 480i 1080i 480i
720p 720p 480i 720p 480i
480p 480p 480i 480p 480i
480i - - 480i 480i
DVD playback
Output
Setup
HDMI / connected HDMI / not connected
HDMI Mode Component/VIDEO Mode Component Mode VIDEO Mode
Auto Optimal Resolution 480i - -
1080p 1080p@60F 480i - -
1080i 1080i 480i 480p 480i
720p 720p 480i 480p 480i
480p 480p 480i 480p 480i
480i - - 480i 480i
•
•
NOTE
If the TV you connected does not support Movie
Frame or the selected resolution, the message “If
no pictures are shown after the selection, please
wait for 15 seconds. And then, the resolution will be
reverted to the previous value automatically. Would
you like to make a selection?” appears.
If you select Yes and the resolution is not supported,
the TV’s screen will go blank. Please wait for 15
seconds and the resolution will revert to the previous
value automatically.
✎
▪
If the screen is blank, press and hold the STOP ( )
button on the front of the player for more than 5
seconds (no disc inserted). All settings are restored to
the factory default. Follow the steps on the previous
page to access each mode and select the Display
Setup that your TV will support.
When the factory default settings are restored, all
the stored user BD data is deleted.
The Blu-ray Disc must have the 24 frame feature to
use the Movie Frame (24Fs) mode.
If you have connected both the HDMI and
Component jacks and you are currently viewing
Component output, there may be a difference
between resolution listed in the table above and
actual resolution depending on your TV.
▪
▪
▪
▪