Port switching – ATEN CS-1262 User Manual

Page 11

Advertising
background image

Port Switching

There are two convenient methods to switch the KVM and
Audio focus between the computers: Manual - which involves
pressing the pushbutton port selection switches located on the
unit’s front panel; and Hotkey - which involves entering
combinations from the keyboard.

Manual:

Press the Port Selection switches as follows:

M

Press a switch for longer than two seconds to bring the KVM
and audio focus to the computer attached to its
corresponding port.

M

Press a switch for less than two seconds to bring only the
KVM focus to the computer attached to its corresponding
port.

M

Press switches 1 and 2 simultaneously for 3 seconds to start
Auto Scan Mode. See p. 10 for details.

Hotkeys:

Key in the hotkey combinations according to the information in
the following table:

Hotkey

Action

[Scroll Lock] [Scroll Lock]
[Enter]

Switches the KVM and audio focus from the port
that currently has the KVM focus to the other port
(1 to 2; 2 to 1).

Note that the KVM and audio focus both go to
this port even if they were on different ports to
begin with.

[Scroll Lock] [Scroll Lock] [K]
[Enter]

Brings only the KVM focus from the port that
currently has it to the other port. The audio focus
remains where it is.

[Scroll Lock] [Scroll Lock] [S]
[Enter]

Brings only the audio focus from the port that
currently has it to the other port. The KVM focus
remains where it is.

- 9 -

2005-07-01

Advertising