ATEN CS-1262 - Manual (Page 13)

Hotkey Summary Table
Hotkey Action
[Scroll Lock] [Scroll Lock]
[Enter] Switches the KVM and audio focus from the port
that currently has the KVM focus to the other port
(1 to 2; 2 to 1).
Note that the KVM and audio focus both go to
this port even if they were on different ports to
begin with.
[Scroll Lock] [Scroll Lock] [K]
[Enter] Brings only the KVM focus from the port that
currently has it to the other port. The audio focus
remains where it is.
[Scroll Lock] [Scroll Lock] [S]
[Enter] Brings only the audio focus from the port that
currently has it to the other port. The KVM focus
remains where it is.
[Scroll Lock] [Scroll Lock] [A]
[Enter] Starts Auto Scan Mode. The KVM focus switches
from port to port at 5 second intervals.
[1, 2, 3, or 4] Once Auto Scan Mode begins, the scan time
interval can be changed at any time by keying in
the number that represents desired scan interval.
[Scroll Lock] [Scroll Lock] [B]
[Enter] Toggles the Beeper on and off.
- 11 -
2005-07-01