Samsung KN55S9CAFXZA - Manual (Page 11)

Reconnecting the Smart Touch Control
If the Smart Touch Control stops operating or works abnormally, replace the
battery as this may be caused by insufficient battery power. If the problem
persists, press the PAIRING button on the Smart Touch Control to restore
pairing with the TV. The PAIRING button cannot be accessed without removing
the Smart Touch Control's battery cover. Within a distance between 1ft to
13.1ft(30cm to 4m), point the Smart Touch Control to the TV receiver and
press the PAIRING button. When pairing is complete, the pairing image
displays at the bottom left of the TV screen.
<The Smart Touch Control's pairing button>
Low Battery Power Warning
When the Smart Touch Control’s battery power becomes low, the indicator
(shown in the illustration below) appears on the bottom left of the TV screen.
Replace the old batteries with new alkaline ones.
<Low battery alarm window>
Using the touch pad
Use the touch pad to implement various commands. Navigate to Tutorial
(System > Device Manager > Smart Touch Control Settings > Tutorial) in
the TV's menu to view an on-screen guide for using the Smart Touch Control.
Dragging Pressing
Drag on the touch pad to move the focus, pointer, or
highlight in the direction the finger is dragging.
Press the touch pad to select the item highlighted or
in focus. When watching TV, press and hold the touch
pad for 2 seconds to displays the channel list. On some
apps, pressing and holding the touch pad for 2 seconds
displays a list of functions available for the app.
English - 10 English - 11
[S9C-ZA]BN68-05356B-02ENG.indb 11 2013-10-30 �� 4:41:48