Samsung HCS4755WX-XAA - Manual (Page 30)

English - 30
O
P E R AT I O N
3
Press the ENTER button.
A crosshatch pattern will
appear on the screen.
Move the cursor to the
position you want to adjust
by pressing the
▲/▼/œ/√
buttons, then press the
ENTER button.
Adjust the convergence by
pressing the
▲/▼/œ/√
buttons, then press the
ENTER button.
Red
Please use the remote control.
4
If a horizontal line is visible,
use the
▲ or ▼ button to
move the line so that it is
superimposed on the
horizontal center-line (i.e.,
make a single horizontal
line that is as white as
possible.).
5
If a vertical line is visible,
use the œ or √ button to
move the line so that it is
superimposed on the
vertical-center line (i.e.,
make a single vertical line
that is as white as
possible.)
After the convergence is
correctly adjusted, press
the
MENU button to exit.
Red
Please use the remote control.
Red
Please use the remote control.
Red
Please use the remote control.
6
To return to the factory
defaults, select “Reset” by
pressing the
▲ or ▼ button,
then press the ENTER
button.
The previously adjusted
convergence will be reset to
the factory defaults.
Press the EXIT button to exit.
Manual Convergence
Red √
Blue √
Reset
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
BP68-00545AEng 10/18/05 5:53 PM Page 30