Samsung HCS4755WX-XAA - Manual (Page 36)

English - 36
O
P E R AT I O N
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button , the TV changes channels in sequence. You will see all
the channels that the TV has memorized. (The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Using the Number Buttons
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press “2,” then “7.”
The TV will change channels when you press the second number.
Using the PRE-CH Button to Select the Previous Channel
Press the PRE-CH button.
The TV changes to the last
channel you were watching.
Using the “-” Button
The “-” button is used to select channels that broadcast both a digital and analog signal.
For example, for channel 7 (digital),
press “7”, then “-”, then “1” and
you will see as left.
DTV Cable
7 - 1
KYW-HD
HD
For channel 7-2 (analog), press
“7”, then “-”, then “2” and you will
see as left.
• HD indicates the TV is receiving a digital High Definition signal. SD indicates the TV is receiving
an analog Standard Definition signal.
DTV Cable
7 - 2
R
SD
Multi
œ To quickly switch between
two channels that are far
apart, tune to one channel,
then use the number
buttons to select the second
channel. Then, use the
PRE-CH button to quickly
alternate between them.
BP68-00545AEng 10/18/05 5:53 PM Page 36