Air Comm Systems ACS 2010 - Manual (Page 3)

Air Comm Systems, Inc. Page 3
n
Physical Specifications
n
Operating Specifications
ACS 2010 Operations and Installation Manual
Physical and Operating Specifications
SIZE: 5.75 in. (14.61cm) W WEIGHT: 1.25 lb. (.56kg)
1.50 in.( 3.81 cm) H
5.03 in.(12.77cm) D MOUNTING: Dzus rail mount
CONTROLS: Panel mounted - transmit = rotary switch, audio inputs = potentiometer,
volume control = dual potentiometer
ILLUMINATION: Edge lit front panel per MIL-P-7738E, type 3. Capable of connection to
dimmer bus for adjustment. Amber transmit light indicates when unit is in
transmit mode.
INPUTS: 5 selectable receive audio inputs and 6 transmit selections.
DUTY CYCLE: Continuous POWER REQUIREMENTS: 28V DC +/- 10%
MAXIMUM OPERATING ALTITUDE: 22,000 ft.
OPERATING TEMPERATURE RANGE: -40 C to +85 C (operating)
-65 C to +125 C (storage)
CURRENT DRAIN: 70 mA at 28V (standby) - 500mA at 28V (max. signal)
AUDIO OUTPUT: Minimum 250 mW into 600 ohms
FREQUENCY RESPONSE: Within 6 db - 300-3000Hz
ICS INPUT IMPEDANCE: 600 ohms
RECEIVER INPUT IMPEDANCE: 600 ohms - matched to receiver
INPUT ISOLATION: Not less than 50 db between inputs
AUDIO MUTING: Not less than 40 db during transmit/ICS (optional)
MIKE SENSITIVITY: 300 mV for rated output
DISTORTION: Less than 10% at 1000 Hz for maximum output