Air Comm Systems ACS 2010 - Manual (Page 4)

Air Comm Systems, Inc. Page 4
Physical Installation
The ACS 2010 is designed to be Dzus mounted and should be installed in the aircraft using the DC37SL-F
Installation kit that is included. The above outline drawing of the unit with dimensions will facilitate the
installation.
The connector pin configuration of the ACS 2010 rear connector and the recommended wire size for the
aircraft cable harness is shown on the following page. Be sure that adequate clearance is allowed for the
rear connector and cable harness.
n
Physical Dimension Outline for mounting
ACS 2010 Operations and Installation Manual
Physical Dimensions