Alignment and adjustments, Test mode, Quick test mode – Samsung WF501ANW-XAA User Manual

Page 4: Warning

Advertising
background image

ALIGNMENT AND ADJUSTMENTS

4

TEST MODE

Test Mode:
Each Test Mode for the GRACE is as follows in

the coming pages. The test modes indicated

by the red arrows are modes unable to get an

access once the washing cycle has started due

to safety resons.

Quick Test Mode

Definition of Quick Test Mode:

- Check operation of all LED’s (Verify faulty LED).
- Check model and software version.
- Check different operating modes (e.g. water valve, motor, door, drain pump, etc.).

How to Enter:
- Plug in the unit.
- Press Soil Key, Spin Key and Power Key at the same Time.

To avoid risk of electrical shock, personal injury or death; disconnect power to washer

before servicing, unless testing requires power.

WARNING

Special Test Mode

Power Off State

Quick Test Mode

EEPROM Clear

Mode

Continuous Cycle

Mode

Service Mode

Demo Mode

Quick Spin Test Mode

Cycle Count Check Mode

S/W Version Check Mode

Fast Time Down Test Mode

Board Input Test Mode

Diagnostic Code

CheckMode

Power On State

(Normal User Mode)

(Technical information)WF501ANWX-03011B_EN.indd 4

2011-06-24 �� 6:20:24

Advertising