At the end of the programme, Change a function, Set the delay start – AEG L 75670 FL User Manual

Page 18: Cancel the delay start, Open the door

Advertising
background image

CHANGE A FUNCTION

You can change only some functions
before they operate.
1. Press button

4

. The indicator

flashes.

2. Change the function set.

SET THE DELAY START

1. Press button

5

again and again

until the display shows the number
of minutes or hours. The related
symbols comes on.

2. Press button

4

, the appliance

starts the countdown of the delay
start.
When the countdown is comple-
ted, the programme starts auto-
matically.

Before you press button

4

to

start the appliance, you can can-
cel or change the set of the de-
lay start.
You cannot set the delay start
with the Steam programme.

CANCEL THE DELAY START

1. Press button

4

. The related indi-

cator flashes.

2. Press button

5

again and again

until the display shows 0’.

3. Press button

4

. The programme

starts.

OPEN THE DOOR

While a programme or the delay start
operates, the appliance door is locked.

To open the appliance door:
1. Press button

4

. The door lock

symbol in the display goes off.

2. Open the appliance door.
3. Close the appliance door and press

button

4

. The programme or the

delay start continues.

If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is

in the drum.

If you deactivate the appliance,
it is necessary to set the pro-
gramme again.

AT THE END OF THE PROGRAMME

• The appliance stops automatically.
• The acoustic signals operate.
• In the display

comes on.

• The indicator of the Start/Pause but-

ton

4

goes off.

• The door lock symbol goes off.
• Press button

1

to deactivate the ap-

pliance. After five minutes from the
end of the programme, the energy
saving function automatically deacti-
vates the appliance.

When you activate the appli-
ance again, the display show the
end of the last set programme.
Turn the programme knob to
set a new cycle.

• Remove the laundry from the appli-

ance. Make sure that the drum is
empty.

• Keep the door ajar, to prevent mil-

dew and odours.

• Close the water tap.

The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent

the creases in the laundry.

– The door stays locked.
– You must drain the water to open the

door.

18

Advertising
This manual is related to the following products: