Re-attaching the refrigerator doors, Disassembling the flex door – Samsung RF24FSEDBSR User Manual

Page 138

Advertising
background image

18_

setting up

RE-ATTACHING THE
REFRIGERATOR DOORS

To reattach the fridge doors after you have moved
the fridge to its fi nal location, assemble the parts
in reverse order.

1. The Water Line must be fully inserted into the

center of the transparent coupler (Type A)
or the Guide Lines (Type B) to prevent water
leakage from the dispenser.

Center of Transparent coupler

Center of Transparent coupler

The Guide Lines

The Guide Lines

Dispenser

Dispenser

clip A (6.35 mm)

clip A (6.35 mm)

clip A (6.35 mm)

clip A (6.35 mm)

Type A

Type A

Type B

Type B

2. Insert the clip in the install pack and check that

it holds the line fi rmly.

DISASSEMBLING THE FLEX
DOOR

1. Take out the Flex Zone ( 1 ) by lifting it up.

1

2. Take off the cover ( 2 ) w/harness with a fl at-

blade screwdriver (-).

2

3. Press the locking tab and separate the Wire

Connector.

When reassembling it, be sure to connect
the wire harness.
If it is not connected, the Flex Room does
not work.

4. Remove 1 hex head bolt from each side with a

socket wrench (10 mm).

5. Lift up the Flex door from the rails.

Putting too much food into the freezer
drawers can prevent the freezer from
closing completely and can cause frost
build-up.

CAUTION

CAUTION

DA68-02916G-08.indb 18

DA68-02916G-08.indb 18

2014. 6. 20.

9:20

2014. 6. 20.

9:20

Advertising