Samsung LE19C451E2W - Manual (Page 17)

English - 15
White Balance „
You can adjust the colour temperature for more natural picture colours.
R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain ● : You can adjust the Colour ‘temperature’ in the light areas by
changing the values of r, G, B. recommended for advanced users only.
Reset ● : The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone „
You can emphasize the pink ‘flesh tone’ in the picture.
Changing the adjustment value will refresh the adjusted screen. N
Edge Enhancement → Off / On
„
You can emphasize object boundaries in the picture.
Picture Options ❑
In PC mode, you can only make changes to the N Colour Tone and Size from among the items in Picture Options.
Colour Tone → Cool / Normal / Warm1 / Warm2 „
You can select the most comfortable colour tone to your eyes.
Settings can be adjusted and stored for each external device you have connected to an input of the TV. N
Warm1 N or Warm2 is only activated when the picture mode is Movie.
Size
„
You can select the picture size which best corresponds to your viewing requirements.
Press the T TOOLS button to display the Tools menu. You can also set the size by selecting Tools → Picture Size.
Auto Wide ● : Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9 ● : Adjusts the picture size to 16:9 appropriate for dvds or wide broadcasting.
Wide Zoom ● : Magnify the size of the picture more than 4:3.
Zoom ● : Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3 ● : This is the default setting for a video movie or normal broadcasting.
Screen Fit ● : Use the function to see the full image without any cut-off when HdMI (720p / 1080i) or Component (1080i) signals
are input.
Depending on the input source, the picture size options may vary. N
The items available may differ depending on the selected mode. N
In PC Mode, only N 16:9 and 4:3 mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV. N
Temporary image retention may occur when viewing a static image on the set for more than two hours. N
Wide Zoom N : Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the
picture up / down. Then press the ENTERE button.
Zoom N : Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the picture
up and down. Then press the ENTERE button. Press the ► button to Select Size, then press the ENTERE button. Press
the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button.
After selecting N Screen Fit in HdMI (1080i) or Component (1080i) mode: Select Position by pressing the ◄ or ► button. Use the
▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting.
If you use the N Screen Fit function with HdMI 720p input, 1 line will be cut at the top, bottom, left and right as in the Overscan
function.
Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3
„
When setting the picture size to Auto Wide in a 16:9 wide Tv, you can determine the picture size you want to see the 4:3 WSS
(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is
intended for users to select it.
16:9 ● : Sets the picture to 16:9 wide mode.
Wide Zoom ● : Magnify the size of the picture more than 4:3.
Zoom ● : Magnify the size of the picture vertically on screen.
4:3 ● : Sets the picture to 4:3 normal mode.
This function is available in N Auto Wide mode.
This function is not available in N PC, Component or HDMI mode.
BN68-03043A.indb 15 2010-04-14 �� 4:56:27