Samsung LE19C451E2W - Manual (Page 22)

English - 20
SETUP
Configuring the Setup Menu
¦
Menu Language ❑
You can set the menu language.
Time ❑
Clock
„
Setting the clock is necessary in order to use the various timer features of the Tv.
The current time will appear every time you press the N INFO button.
If you disconnect the power cord, you have to set the clock again. N
Clock Mode ●
You can set up the current time manually or automatically.
Auto – : Set the current time automatically using the time from the digital broadcast.
Manual – : Set the current time to a manually specified time.
Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time N
manually.
The Antenna or cable must be connected in order to set the time automatically. N
Clock Set
●
You can set the current time manually.
Set up this item when you have set N Clock Mode to Manual.
You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control. N
Sleep Timer → Off / 30 min / 60 min / 90 min / 120 min / 150 min / 180 min
„
The sleep timer automatically shuts off the Tv after a preset time (30, 60, 90, 120, 150 and 180 minutes).
The TV automatically switches to standby mode when the timer reaches 0. N
To cancel the N Sleep Timer function, select Off.
Press the T TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools → Sleep Timer.
Timer 1 / Timer 2 / Timer 3 „
Three different on / off timer settings can be made. You must set the clock first.
On Time ● : Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.)
Off Time ● : Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.)
Volume ● : Select the desired turn on volume level.
Antenna ● : Select Air or Cable.
Channel ● : Select the desired channel.
Repeat ● : Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
When N Manual is selected, press the ► button to select the desired day of the week. Press the ENTERE button over the
desired day and the c mark will appear.
You can set the hour, minute and channel by pressing the number buttons on the remote control. N
Auto Power Off N
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the Tv was
turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a Tv is
on for too long time.
Plug & Play
Menu Language : English ►
Time
Broadcast
Security
General
Setup
BN68-03043A.indb 20 2010-04-14 �� 4:56:28