Appendix a display timing mode and osd, A.1 supported input timing modes, Table a.1: supported input formats – Advantech AWS-8248 User Manual

Page 50: Supported input timing modes

Advertising
background image

AWS-8248 User’s Manual

42

Appendix A Display Timing Mode and
OSD

A.1 Supported Input Timing Modes

The nineteen kinds of timings below are already programmed in this
module. The input synchronous signals are automatically recognized.

Table A.1: Supported Input Formats

Note 1:

Even if the preset timing is entered, a little adjust-

ment of the functions such as Horizontal period,

CLK-delay and display position, are required. The

adjusted values are memorized in every preset num-

ber.

Note 2:

This module recognizes the synchronous signals

with near preset timing of the frequency of the HS

and Vsync, even in the case that the signals other

than the preset timing that were entered.

Note 3:

Because adjustments may not fit, such as differing

magnifying ratios or, in the case that you use it

except for the display timing that was preset.

56Hz

60Hz

70Hz

72Hz

75Hz

640x480

Yes

Yes

Yes

800x600

Yes

Yes

Yes

Yes

1024x768

Yes

Yes

Yes

Resolution

Vertical Frequencies

Advertising