Aiwa XD-DV270 - Manual (Page 10)

10
ENGLISH
Referring
Letter
See A.
See B.
See C.
See D.
See E.
CONNECTIONS
Before making connections
• Connect the AC cords of the unit and external
equipment at the end, after finishing the other
connections.
• Insert the plugs completely into the jacks. Loose
connections may produce a humming sound or other
noise interference.
• When using an optical connection, remove the dust cap
from the DIGIT AL AUDIO OUT OPTICAL jack on the rear
of this unit. Keep the cap in store. When not using optical
connections, the dust cap should be in place.
• Refer to the instructions for the connected equipment.
CAUTION
Do not select “ BITSTREAM” in the “AUD OUT” when
connecting to an AV receiver not equipped with a Dolby
Digital decoder or DTS decoder (with an optical or
coaxial connecting cord).
Merely attempting to play a DVD may cause a high level
of noise which could be harmful to your ears and
damage the speakers. In such a case, be sure to select
“DIGITAL PCM” in the “AUD OUT”.
Before connection, identify the type of your audio equipment or of the TV set referring to the following chart. Then decide
the connection and the setup menu according to the types.
Audio system to be connected
None (only the television is connected)
A stereo system or an amplifier
An AV receiver equipped with Dolby Digital
decoder or DTS decoder
An AV receiver equipped with Dolby Pro Logic
Surround
NOTES
• The player cannot be connected to a TV set which is not equipped with a video input connector .
• Use a commercially available stereo-monaural audio cord when connecting to a monaural TV set.
NOTES
• When the picture noise appears while copy-protected DVDs
are played, connect the unit directly to a TV set. Do not
connect through a VCR, TV/VCR or AV selector .
• For the speakers and their connection, refer to the
instructions for the AV receiver .
CAUTION
Do not place heavy objects on this unit, otherwise disc
tray of this unit may not be opened.
Input jack of equipment to be
connected to the DVD player
Digital input jack
Analog audio input jacks (L/R)
Digital input jack
Analog audio input jacks (L/R)
For customers living in Burma, Cambodia,
Philippines, Taiwan or Republic of Korea
In the above countries, TV broadcasting system is NTSC.
To use this unit with the NTSC TV set, TV SYS in the setup
menu of this unit must be changed to NTSC, after connecting.
For more details, refer to "Basic operations" on page 32
and "TV SYS" on page 34.