Allied Telesis AT-SBx81CFC960 - Manual (Page 159)

SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section II: Installing the Chassis 159
Figure 100. Attaching a Fiber Optic Cable to a Transceiver in the AT-
SBx81XS16 Line Card
6. Repeat this procedure to install additional transceivers in the AT-
SBx81XS16 Line Cards.
After installing and cabling the transceivers, do one of the following:
 To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
 After cabling all the ports in the chassis, go to Chapter 9,
“Powering On the Chassis” on page 169.