Allied Telesis AT-GS950/10PS - Manual (Page 220)

Chapter 18: Access Control Configuration
220
3. Enter a number in the Classifier Index field.
The Classifier Index must be a unique number within the range of
1 - 65535
.
Note
The Classifier Index is a required parameter when you create a
Policy. See “Create Policy” on page 238 for more information.
4. Enter data one or more of the remaining parameters. They are listed
here:
Source MAC Address - Specifies the source MAC address. The
format is xx.xx.xx.xx.xx.xx.
Source MAC Mask Length - Indicates the length of the Source
MAC Mask ranging from 1- 48.
Destination MAC Address - Specifies the destination MAC
address. The format is xx.xx.xx.xx.xx.xx.
Destination MAC Mask Length - Indicates the length of the
Destination MAC Mask ranging from 1 - 48.
VLAN ID - A unique number identifying a VLAN ranging from 1 to
4000.
802.1p Priority - 802.1p priority level of the frame ranging from 0
to 7.
Ether Type - Indicates the protocol of the ethernet frame protocol
ranging from 0000 to FFFF.
DSCP - The DSCP (Differentiated Services Code Point) value in
the IP header ranging from 0 - 63.
Protocol - Indicates the packet protocol ranging from 0 to 255.
Source IP Address - Specifies the source IP address.
Source IP Mask Length - Specifies the mask length of the source
IP address ranging from 0 - 32.
Destination IP Address - Specifies the destination IP address.
Destination IP MAC Mask Length - Specifies the mask length of
the destination IP address ranging from 0 - 32.
Source Layer 4 Port - Indicates the source layer 4 port ranging
from 1 - 65535.
Destination Layer 4 Port - Indicates the destination layer 4 port
ranging from 1 - 65535.