Allied Telesis AT-x510DP-52GTX - Manual (Page 25)

x510DP-52GTX Installation Guide
25
LEDs
Here are descriptions of the LEDs.
LEDs for the
Twisted Pair
Ports
Each twisted pair port has two LEDs that display link, activity and duplex
mode information. The LEDs are shown in Figure 4.
Figure 4. LEDs for the 10/100/1000Base-T Ports
The LEDs are described in Table 2 on page 25.
Table 2. LEDs on the 10/100/1000Base-T Ports
LED State Description
Link/
Activity
LED Solid Green A port has established an 1000 Mbps link to
a network device.
Flashing
Green A port is transmitting or receiving data at
1000 Mbps.
Solid Amber A port has established a 10 or 100 Mbps
link to a network device.
Flashing
Amber A port is transmitting or receiving data at 10
or 100 Mbps.
Off A port has not established a link with
another network device or the LEDs are
turned off. To turn on the LEDs, use the
eco-friendly button.
Link/Activity
LED
Duplex Mode
LED
Duplex Mode
LED
Link/Activity
LED