Allied Telesis SwitchBlade x8106 - Manual (Page 139)

SwitchBlade x8106 Chassis Switch Installation Guide
139
Figure 95. Release Tab on the AT-SBx81XS6 Line Card
3. Slide the connector into the slot until it clicks into place, as shown in
Figure 96.
Figure 96. Installing the AT-SP10TW Cable in the AT-SBx81XS6 Line
Card
4. Install the other end of the cable into an SFP+ slot on another network
device.
5. Repeat this procedure to install additional AT-SP10TW Cables.