Allied Telesis AT-S94 - Manual (Page 111)

Configuring Ports
Aggregating Ports
Page 111
Defining Port Trunking
The Port Trunking Page contains information about all port trunks currently defined on the device.
To modify Port Trunking settings:
1. Click Layer 1 > Port Trunking. The Port Trunking Page opens:
Figure 67: Port Trunking Page
The following information is displayed:
• Trunk — Displays the ID number of the trunk.
• Name — Displays the name of the trunk. The name can be up to sixteen alphanumeric characters. No
spaces or special characters, such as asterisks and exclamation points, are allowed. Each trunk must be
given a unique name.
• Link State — Indicates the current link status.
• Members — Indicates the ports which are defined for the trunk.
2. Select the trunk to modify.