Show sessions – Allied Telesis AT-S95 CLI User Manual
Page 324
Page 324
Allied Telesis
AT-S95 Management Software CLI User’s Guide
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about the active users
show sessions
The show sessions User EXEC mode command lists open Telnet sessions.
Syntax
show sessions
Parameters
This command has no arguments or keywords.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Console show users
Username
Protocol
Location
----------
-----------
------------
manager
Serial
0.0.0
Admin
HTTP
192.168.1.960.
Bob
Telnet
192.168.1.120
bill
Telnet
192.168.1.101
console#