Allied Telesis AT-S95 CLI - Manual (Page 71)

Clock Commands
Page 71
Chapter 5. Clock Commands
clock set
The clock set Privileged EXEC mode command manually sets the system clock. To avoid an SNTP conflict, this
command should only be used if there is no clock source set.
Syntax
clock set hh:mm:ss day month year
or
clock set hh:mm:ss month day year
Parameters
•
hh:mm:ss — Current time in hours (military format), minutes, and seconds (hh: 0 - 23, mm: 0 - 59, ss: 0 - 59).
• day — Current day (by date) in the month (1 - 31).
• month — Current month using the first three letters by name (Jan, …, Dec).
• year — Current year (2000 - 2097).
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the system time to 13:32:00 on the 7th March 2009.
clock source
The clock source Global Configuration mode command configures an external time source for the system clock.
Use no form of this command to disable external time source.
Syntax
clock source {sntp}
no clock source
Parameters
•
sntp — SNTP servers
Console# clock set 13:32:00 7 Mar 2009