Allied Telesis AT-WA7400/EU - Manual (Page 261)

AT-WA7400 Management Software User’s Guide
261
The Reset Configuration page is shown in Figure 38.
Figure 38. Reset Configuration Page
5. Click Reset to restore the factory defaults on the access point. (This
will clear all of your previous settings, including updated passwords.)
6. Repeat this reset step for every access point in the cluster.
Caution
Do not proceed to the next step until you have stopped clustering on
all of access points in the pre-existing cluster.
7. From the main menu of any access point, select Cluster > Access
Points.
The Cluster Management page is shown in Figure 39.
Figure 39. Cluster Management Page
8. Click Refresh.