Allied Telesis AT-WA7400/EU - Manual (Page 308)

Appendix D: Command Line Interface (CLI) for Access Point Configuration
308
command gets the security mode in use on the internal network:
AT-WA7400# get interface wlan0 security
static-wep
The following command gets details on how the internal network is
configured, including details on Security.
AT-WA7400# get bss wlan0bssInternal detail
Field Value
---------------------------------------------
status up
description Internal
radio wlan0
beacon-interface wlan0
mac 00:0C:41:16:DF:A6
dtim-period 2
max-stations 2007
ignore-broadcast-ssid off
mac-acl-mode deny-list
mac-acl-name wlan0bssInternal
radius-accounting off
radius-ip 127.0.0.1
radius-key secret
open-system-authentication off
shared-key-authentication on
wpa-allow-non-wpa-stations off
wpa-cipher-tkip off
wpa-cipher-ccmp off
wpa-allowed off
wpa2-allowed off
rsn-preauthentication off
The following command gets details on the interface and shows the WEP