Allied Telesis AT-S106 - Manual (Page 134)

Chapter 11: Port Mirroring
134
Disabling Port Mirroring
To disable port mirroring, do the following procedure:
1. Select the Bridge folder.
The Bridge folder expands.
2. From the Bridge folder, select Mirroring.
The Mirroring page is shown in Figure 41 on page 133.
3. From the Mirroring Status list, select Disable and click Apply.
Port mirroring is immediately disabled on the switch. You can now use
the mirroring port for regular network operations.
4. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.