Allied Telesis AT-S106 - Manual (Page 173)

AT-S106 Management Software Web Browser User’s Guide
173
Configuring 802.1x Port-based Network Access Control
To configure 802.1x port-based network access control, do the following
procedure:
1. Select the Security folder from the main menu on the left side of the
page.
The Security folder expands.
2. From the Security folder, select Port Access Control.
The 802.1x Access Control Configuration Page is displayed. See
Figure 54.
Figure 54. 802.1x Access Control Configuration Page
3. To select a port, click Port and select the port you want to configure
from the pull-down menu. You can select one port at a time or select
All ports.
The current settings for the selected port are displayed.