Allied Telesis AT-2912T User Manual
Secure ethernet network adapters, Installation and user’s guide
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Contents
- Figures
- Figure 1. AT-2712FX/SC Adapter 16
- Figure 2. AT-2912T Adapter 17
- Figure 3. AT-2712FX/SC Faceplate 19
- Figure 4. AT-2912T Faceplate 19
- Figure 5. Removing the Low-Profile Bracket 25
- Figure 6. Fastening Screws onto Standard Bracket 26
- Figure 7. Removing the PC Cover 28
- Figure 8. Removing the Faceplate From PCI Slot 28
- Figure 9. Inserting the Adapter with a High-profile Bracket 29
- Figure 10. Securing the Adapter with a High-profile Bracket 30
- Figure 11. Found New Hardware Page 35
- Figure 12. Found New Hardware - Ethernet Controller Page 36
- Figure 13. Found New Hardware - Ethernet Controller Insert the Disc Page 37
- Figure 14. Found New Hardware - Ethernet Controller Windows Couldn’t Find Driver Page 38
- Figure 15. Found New Hardware - Ethernet Controller Browse for Driver Software Page 38
- Figure 16. Found New Hardware - Ethernet Controller Installing Driver Page 39
- Figure 17. Update Driver Software - Allied Telesis AT-2712FX 100FX Fiber Page 40
- Figure 18. Control Panel Window 41
- Figure 19. Administrative Tools Window 42
- Figure 20. Computer Management Window 42
- Figure 21. Device Manager Window 43
- Figure 22. System Properties Dialog Box 48
- Figure 23. Hardware Tab 49
- Figure 24. Device Manager Window 50
- Figure 25. Welcome to Hardware Update Wizard Window 51
- Figure 26. Hardware Update Wizard Window 51
- Figure 27. Allied Telesis AT-2712FX 100 Mb Fiber Ethernet Properties Window 54
- Figure 28. RJ-45 Connector and Port Pin Layout 90
- Tables
- Table 1: Safety Symbols 12
- Table 2: Fiber Optic Port 100 LED Status 19
- Table 3: Twisted-Pair Port LED Status 20
- Table 4: Ethtool Utility Examples 70
- Table 5: Linux Driver Settings 70
- Table 6: DOS Diagnostics Prerequisites 76
- Table 7: DOS Prompt Commands 77
- Table 8: DMA Test Patterns 81
- Table 9: Default Register 82
- Table 10: MDI Pin Signals (10Base-T or 100Base-TX) 91
- Table 11: MDI-X Pin Signals (10Base-T or 100Base-TX) 91
- Table 12: RJ-45 1000Base-T Connector Pinouts 91
- Table 13: Console Port Pinouts 92
- Preface
- Chapter 1
- Introducing the AT-2712FX/SC and AT-2912T Adapters
- Chapter 2
- Installing the Hardware
- Chapter 3
- Enabling Vista IPSec
- Chapter 4
- Installing Windows Server 2003 and Windows XP Driver Software
- Chapter 5
- Enabling LINUX
- Chapter 6
- MS-DOS Diagnostics
- Appendix A
- Specifications