Allied Telesis AT-9448Ts/XP (Basic Layer 3) - Manual (Page 32)

Chapter 1: Overview
32
AC Power Connector
The AT-9400 Switch have a single AC power supply socket on the back
panel, which has autoswitch AC inputs. To power the switch on or off,
connect or disconnect the power cord.
Refer to “Technical Specifications” on page 101 for the input voltage
range.
Warning: Power cord is used as a disconnection device. To de-
energize equipment, disconnect the power cord.

5
Warning: This unit might have more than one power cord. To
reduce the risk of electric shock, disconnect all power cords
before servicing the unit.
 32