Allied Telesis AlliedView-EMS 4.0.1 QoS MANAGER - Manual (Page 138)

AlliedView™-EMS 4.0.1 QoS Manager User’s Guide Page 138 of 146
Property Name Description Valid Values
Where M = 0-32.
Destination IP
Address
Specifies the destination IP address
(either host or subnet) of an IP
packet.
This can be set by entering an IP
Address in dotted decimal notation
with an optional mask
• NNN.NNN.NNN.NNN
• NNN.NNN.NNN.NNN/M
Where M = 0-32.
IP DSCP Specifies the Code Point bits of the
DiffServ field of an IP packet.
This can be set by entering one or
more integers from 0-63. Input can
be a comma separated list or a
range (specified as m-n) or a
combination of both. (e.g. 2, 4-7)
This value can also be set to "any".
IP Protocol Specifies a Layer 4 IP protocol of an
IP packet.
This can be set by selecting any of
the following values:
• TCP
• UDP
• ICMP
• IGMP
• NONTCPUDP
• any
This can also be set by entering an
integer from 1-255.
IP Type of Service Specifies the value of the
precedence field within the TOS
(Type of Service) byte of an IP
packet.
Range: any, 0-7
Destination IPX
Address
Specifies the destination network
address of an IPX packet.
This can be set by entering an a 4-
byte hexadecimal value. (00000001-
FFFFFFFF)
Source IPX
Socket
Specifies the source IPX socket
number of an IPX packet.
This can be set by selecting any of
the following values:
• NCP
• SAP
• RIP
• NNB
• DIAG
• NLSP
• IPXWAN
• any