Allied Telesis AT-S94 - Manual (Page 171)

Configuring SNMP
Page 171
• Authentication Key — Defines the HMAC-MD5-96 or HMAC-SHA-96 authentication level. The
authentication and privacy keys are entered to define the authentication key. If only authentication is required,
16 bytes are defined. If both privacy and authentication are required, 32 bytes are defined. Each byte in
hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a period or a colon.
• Privacy Key — Defines the Privacy Key (LSB). If only authentication is required, 20 bytes are defined. If both
privacy and authentication are required, 36 bytes are defined. Each byte in hexadecimal character strings is
two hexadecimal digits. Each byte can be separated by a period or colon.
3. Define the fields.
4. Click Apply. The SNMP user is added, and the device is updated.
To modify SNMP control privileges:
1. Click SNMP > Users. The SNMP Users Page opens.
2. Click Modify. The SNMP User Configuration Page opens:
Figure 117: SNMP User Configuration Page
3. Define the fields.
4. Click Apply. The SNMP User is modified, and the device is updated.